Skip to main content
Skip table of contents

Arduino

Connect to the developer tag using an Arduino. Download the Arduino Library and get started!

Supported Arduino hardware

Currently the supported Arduino boards are the Arduino Uno, Arduino Mega, and Arduino Nano. The Pozyx shield can be attached to these boards as shown below. Make sure that you only power the Arduino and not the shield.

Downloads

  • The Arduino IDE. Download the IDE from the Arduino website and install it.

  • The Pozyx Arduino Library. The library can be obtained from Github or downloaded from the zip file directly. Once downloaded, open the Arduino IDE and go to Sketch > Include Library > Add .ZIP library... and select the downloaded zip file. The examples should now show up under File > Examples > Pozyx (a restart of the program may be necessary first).

  • The Pozyx Arduino Library documentation can be found here: https://ardupozyx.readthedocs.io/

JavaScript errors detected

Please note, these errors can depend on your browser setup.

If this problem persists, please contact our support.